Tag false ceiling

By mixing small sawdust and compressing it, the board of medium density is made, we call it MDF. There is no layer in MDF like Plywood, so its strength is very useful and its ability to hold screws or nails is very useful. That’s why it is never directly recommended for work in interior design, then it comes to where it should be used.

You must have heard the name of CNC Cutting, we use it in many places, where MDF is recommended, the main reason for this is that it is very easy to cut the design and we cannot use laminates on CNC Cutting, so Deco paint on it. is used a lot And MDF is considered a very good board for Deco Paint, so wherever you want to use Deco paint, you can see MDF as an option, but Deco Paint is also a very expensive option, but it depends on the look of your house. enhances CNC Cutting is widely used in TV Unit, Partition and False Ceiling

There are many options for false ceiling. We are going to talk about some false ceiling below which is quite popular.

Types Of False Ceiling

Gypsum ceiling

In today’s time, gypsum is mostly used in false ceiling. Along with being very light, it is fire resistant, it is generally available in sheets of 6*4 size, it is very easy to install, which takes less time for installation, less dust, etc., also comes out for finishing. It comes very well, due to all these reasons, it has become very popular in a very short time.

POP ceiling

The use of POP has been going on for a long time, before Gypsum became popular, POP used to be used in most of the houses. In earlier times, when POP used to be used, POP was dried on the site itself by proper mixing, after that it was installed through the channel But now it is also available in sheet apart from powder form, it is slightly heavier than gypsum, so normally its size is 3 * 4 feet or it comes in handy size, if compared to gypsum sheet, then this gypsum It is stronger than and has the ability to tolerate POP if water comes on it occasionally. But the gypsum board does not tolerate water at all and the gypsum board can get damaged in one go under the influence of water. By the way, wherever there is a chance of water coming, both gypsum and POP should not be used.

PVC ceiling

PVC false ceiling is slowly becoming quite popular. This false ceiling is mostly used for Garages, Basements, Kitchens, Bathrooms, but nowadays it is also being used a lot for bedrooms or living rooms. It is very easy to install and it is also very easy to manage. Being very light, it is Moisture Resistant and Termites Resistant.

Wood ceiling

Wood ceiling is also being used a lot for false ceiling, it adds beauty to the look of the house. We can use wood ceiling in many different ways. We use it for gypsum, POP false. Can also be done with ceiling which gives a contrast look, we also use MDF wood a lot in false ceiling on which Deco is painted, which changes the look of the house a lot, which looks very modern, it is used PVC false Also quite done with sealing

Fiber Ceiling

Fiber false ceiling is considered a perfect option for commercial complex because it is available at a very low cost and it is very easy to install, it also has many benefits like it is fire resistant, sound proof but it is not suitable for residential house. Not recommended for use

Glass ceiling

Glass ceiling is also being used in many places, it plays an important role in giving a contrast look, it is used in hotels, restaurants, libraries or other commercial complexes, but it is used in limited quantities.

Apart from these, other types of ceiling are also being used, but the above false ceilings are mostly used, in which Gypsum and POP are mostly used in homes and fiber ceiling is mostly used for commercial complex.